Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp
Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp

Leofoto ST-X Rifle Tripod with Integrated Lever-Control Ballhead | Lever-Release Clamp

$658.00
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • Inventory on the way
The Leofoto ST-X Series Rifle Tripods are one of the most compact apex setups on the market with a perfectly balanced weight to strength ratio. The ST-X Series have a redesigned lever-release, arca/ picatinny hybrid clamp and knob controlled, integrated ballhead. These tripods offer maximum rigidity, capable of supporting non-traditional shooting positions with a maximum load capacity ranging from 33 pounds to 44 pounds fully extended. They also feature three angle stop positions to increase shooting position capabilities and a compact design which maintains a small footprint, creating a tripod setup which is extremely easy to pack and carry on the go. The brand new "X" version features a new knurled-bar angle stop design, which allows for one handed operation. The lever-release clamp has also been redesigned for an improved clamping experience and the width of the clamp can be adjusted to precisely fit any arca/picatinny rail, even those which are slightly off standard spec. 
  • Integrated lever control ballhead with lever-release clamp for speed
  • New "X" Version Angle Stop: Allows for one handed angle adjustment
  • Arca and Picatinny compatible hybrid clamp
  • Threaded 1/4” accessory socket on the side of the apex to provide the perfect placement of a strap or magic arm for holding anything from an umbrella or a phone to a kestrel
  • Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Leofoto offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed
  • Large diameter rubber feet keep leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle
  • Hard anodized, CNC-machined 6061 T6 aluminum hardware
  • Toray Carbon Fiber Leg Tubes
  • Included: Leofoto Tripod Case

 

ST-324CX
 Integrated ball head
Lever-Release Dual Clamp for Arca/Picatinny
Lever-Controlled Ball
Leg tube diameter:
32/28/25/22mm
 Max. height: 1500mm / 59.06in
Min. height: 135mm / 5.31in
Folded length: 580mm / 22.83in
Leg Section : 4
Weight: 1.73kg / 3.81lb
Max load: 25kg / 55.12lb"
ST-323CX Integrated ball head
Lever-Release Dual Clamp for Arca/Picatinny
Lever-Controlled Ball
Long Ver.
Leg tube diameter:
32/28/25mm
 Max. height: 1650mm / 65in
Min. height:
Folded length:
Leg Section : 3
Weight:
Max load: 25kg / 55.12lb
ST-364CX Integrated ball head
Lever-Release Dual Clamp for Arca/Picatinny
Leg tube diameter:
36/32/28/25mm
 Max. height: 1680mm / 66.14in
Min. height: 120mm / 4.72in
Folded length: 620mm / 24.41in
Leg Section : 4
Weight: 2.1kg / 4.63lb
Max load: 30kg / 66.14lb"
ST-364CLX
 Integrated ball head
Lever-Release Dual Clamp for Arca/Picatinny
Lever-Controlled Ball
Long Ver.
Leg tube diameter:
36/32/28/25mm
 Max. height: 1760mm / 69.29in
Min. height: 140mm / 5.51in
Folded length: 660mm / 25.98in
Leg Section : 4
Weight: 2.18kg / 4.81lb
Max load: 30kg / 66.14lb"

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like

Recently viewed